ieee research paper electrical engineering

ELECTRICAL ENGINEERING RESEARCH PAPERS IEEE PAPER

Electrical engineering 2024.

Active Distribution Networks

Active distribution network will be able to highly integrate and utilize a variety of distributed energy through real-time control system and two-way communication network to improve system reliability and operational efficiency. Active distribution network concept is capable of real-time monitoring of whole grid and it may utilize the flexibility of distributed energy resources to enhance

four quadrant dc motor control technology

High performance motor drives are necessary parts of industrial applications. A motor drive system with high performance has special characteristics such as good dynamic speed command tracking and load regulating response. The methods of control are much simpler and less expensive than those of alternating current motors. Modelling and simulation of four quadrant operation of

HVAC High Voltage Alternating Current

Commissioning of HVAC systems in a campus building with regard to the indoor environment and energy performancefree downloadTodays HVAC systems in the building sector become more and more complex in order to fulfill the increasing standard of the indoor environment, which typically have many components, sub-systems, and controls. Commissioning is a quality-oriented process to Stage

supercharger

A supercharger is an air compressor that increases the pressure or density of air supplied to an internal combustion engine. This gives each intake cycle of the engine more oxygen, letting it burn more fuel and do more work, thus increasing power. Development of electric supercharger to facilitate the downsizing of automobile enginesfree downloadTo satisfy

IC INTERNAL COMBUSTION ENGINES

Combustion, also known as burning, is the basic chemical process of releasing energy from a fuel and air mixture. In an internal combustion engine (ICE), the ignition and combustion of the fuel occurs within the engine itself. The engine then partially converts the energy from the combustion to work. An internal combustion engine is a

electrical transmission technology

Electric power transmission is the bulk movement of electrical energy from a generating site, such as a power plant, to an electrical substation. The interconnected lines which facilitate this movement are known as a transmission network. Evaluation of electrical transmission concepts for large offshore wind farmsfree download Todays installed offshore wind farms have a relative

power transmission trends

Electrical structure of future off-shore wind power plant with a high voltage direct current power transmission free download General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide

electrical power transmission

Transmission and distribution refers to the different stages of carrying electricity over poles and wires from generators to a home or a business. The primary distinction between the two is the voltage level at which electricity moves in each stage. Scheduling maintenance of electrical power transmission networks using genetic programming free download Abstract The National Grid

SMART SOLAR INVERTER

Smart inverters are an emerging technology that can enable more efficient integration of distributed energy resources (DERs). Like traditional inverters, smart inverters convert the direct current output of solar panels into the alternating current that can be used by consumers in their homes and businesses Smart Solar Inverter free download The term solar smart inverter

Dynamic voltage restoration 2019

Dynamic voltage restoration is a method of overcoming voltage sags and swells that occur in electrical power distribution. These are a problem because spikes consume power and sags reduce efficiency of some devices. Dynamic Voltage Restorer for Compensation of Voltage Sagfree download Superiority of the output power delivered from the utilities has become a major

ELECTRICAL ENGINEERING 2017

Electrical engineering 2016, electrical engineering 2015, best electrical engineering research topics, electrical engineering papers, ieee projects 2022, seminar reports, free ieee projects ieee papers.

IEEE Projects for EEE with Abstract and Base Paper

Welcome to our comprehensive collection of IEEE projects for Electrical and Electronics Engineering (EEE), featuring detailed abstracts and base papers. This page serves as a one-stop resource for students, researchers, and professionals looking to explore and develop cutting-edge projects in the field of EEE. Our curated selection covers a wide range of topics, providing valuable insights and foundational knowledge to help you succeed in your academic and professional endeavours.

Bridging Theory and Practice: IEEE Projects for EEE with Abstracts and Base Papers

To enhance your experience, we have categorized our projects into specific areas of interest. These include Power System Projects , focusing on the stability and efficiency of electrical grids; Pow er Electronics Projects , which delve into the design and control of power converters; Renewable Based Projects , emphasizing sustainable energy solutions; Electric Vehicles Based Projects , exploring advancements in EV technology; and Controller Based Projects , highlighting innovative control mechanisms. Each category is interlinked to ensure seamless navigation and easy access to relevant information. Dive in and discover the perfect project to elevate your EEE expertise!

Himanshu Garg

Experienced Engineering Mentor and Educator | Empowering Students to Excel. With a passion for guiding and empowering engineering students, I am dedicated to supporting their academic journey and fostering their success. With a strong background in Process Control (instrumentation), I completed my Mtech in 2020. Passionate about helping students excel, aims to introduce new modules addressing mental stress problems and other crucial areas in Engineer's Planet. Connect with me to explore opportunities for collaboration and support in engineering education.

AI-powered software to Simplify Engineering Workloads

How to prepare for an internship interview for mtech and btech students, you may also like, mtech project ideas in electronics and communication engineering, mtech thesis topics in computer science, mtech construction management project topics, machine design project topics list 2024, data science projects free downloads, data analytics projects free downloads, java project for 11th & 12th free downloads, space-based solar power: harvesting renewable energy from space, enhancing practical skills through hands-on m.tech/b.tech engineering projects, top 10 javascript computer science project ideas for....

[…] Power System Project using MATLAB […]

[…] IEEE Transactions on Pattern Analysis and Machine Intelligence […]

Leave a Reply Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed .

• Mentorship Sessions
• M.Tech Projects R&D
• Ph.D Projects R&D
• B.Tech Projects R&D
• 1. Internship
• 2. Workshops
• 3. Bootcamp

IMPORTANT LINKS

• Announcements New
• Project Downloads
• Career / Internship
• Privacy Policy
• Terms & Conditions
• Patent Assistance NEW
• MTech Projects Hot
• PhD Projects New
• BTech Projects
• AMIE Projects
• DBMS Projects Hot
• ECE & EEE Projects
• Research Paper
• Thesis Report

Fabrum Planet Solutions Pvt. Ltd.

• [email protected]
• +91 8882479344
• Delhi | Mumbai | Kolkata | Chennai

© 2024 All Rights Reserved Engineer’s Planet

Digital Media Partner #magdigit 

• Terms & Conditions

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. OK Read More

An Overview of Artificial Intelligence Applications for Power Electronics

Ieee account.

• Change Username/Password
• Update Address

Purchase Details

• Payment Options
• Order History
• View Purchased Documents

Profile Information

• Communications Preferences
• Profession and Education
• Technical Interests
• US & Canada: +1 800 678 4333
• Worldwide: +1 732 981 0060
• Contact & Support
• About IEEE Xplore
• Accessibility
• Terms of Use
• Nondiscrimination Policy
• Privacy & Opting Out of Cookies

A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. © Copyright 2024 IEEE - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.

Share this page:

Top 10 Published Articles of IEEE Access

Over the past ten years, IEEE Access has published some of the most groundbreaking research in electrical and electronics engineering and computer science. In celebration of the 10 Year Publishing Anniversary , our Editors have selected the Top 10 articles published in IEEE Access over the last decade based on downloads, citations, and overall impact in IEEE fields of interest.

Millimeter wave mobile communications for 5g cellular: it will work (published in 2013).

Authors : Theodore S. Rappaport, Shu Sun, Rimma Mayzus, Hang Zhao, Yaniv Azar, Kevin Wang, George N. Wong, Jocelyn K. Schulz, Mathew Samimi, Felix Gutierrez

Abstract : The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.

3D Printing for the Rapid Prototyping of Structural Electronics (Published in 2014)

Authors : Eric Macdonald, Rudy Salas, David Espalin, Mireya Perez, Efrain Aguilera, Dan Muse, Ryan B. Wicker

Abstract : In new product development, time to market (TTM) is critical for the success and profitability of next generation products. When these products include sophisticated electronics encased in 3D packaging with complex geometries and intricate detail, TTM can be compromised – resulting in lost opportunity. The use of advanced 3D printing technology enhanced with component placement and electrical interconnect deposition can provide electronic prototypes that now can be rapidly fabricated in comparable time frames as traditional 2D bread-boarded prototypes; however, these 3D prototypes include the advantage of being embedded within more appropriate shapes in order to authentically prototype products earlier in the development cycle. The fabrication freedom offered by 3D printing techniques, such as stereolithography and fused deposition modeling have recently been explored in the context of 3D electronics integration – referred to as 3D structural electronics or 3D printed electronics. Enhanced 3D printing may eventually be employed to manufacture end-use parts and thus offer unit-level customization with local manufacturing; however, until the materials and dimensional accuracies improve (an eventuality), 3D printing technologies can be employed to reduce development times by providing advanced geometrically appropriate electronic prototypes. This paper describes the development process used to design a novelty six-sided gaming die. The die includes a microprocessor and accelerometer, which together detect motion and upon halting, identify the top surface through gravity and illuminate light-emitting diodes for a striking effect. By applying 3D printing of structural electronics to expedite prototyping, the development cycle was reduced from weeks to hours.

C2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems (Published in 2017)

Authors : Kazi Masudul Alam, Abdulmotaleb El Saddik

Abstract : Cyber-physical system (CPS) is a new trend in the Internet-of-Things related research works, where physical systems act as the sensors to collect real-world information and communicate them to the computation modules (i.e. cyber layer), which further analyze and notify the findings to the corresponding physical systems through a feedback loop. Contemporary researchers recommend integrating cloud technologies in the CPS cyber layer to ensure the scalability of storage, computation, and cross domain communication capabilities. Though there exist a few descriptive models of the cloud-based CPS architecture, it is important to analytically describe the key CPS properties: computation, control, and communication. In this paper, we present a digital twin architecture reference model for the cloud-based CPS, C2PS, where we analytically describe the key properties of the C2PS. The model helps in identifying various degrees of basic and hybrid computation-interaction modes in this paradigm. We have designed C2PS smart interaction controller using a Bayesian belief network, so that the system dynamically considers current contexts. The composition of fuzzy rule base with the Bayes network further enables the system with reconfiguration capability. We also describe analytically, how C2PS subsystem communications can generate even more complex system-of-systems. Later, we present a telematics-based prototype driving assistance application for the vehicular domain of C2PS, VCPS, to demonstrate the efficacy of the architecture reference model.

Peeking Inside the Black-Box: A Survey on Explainable Artificial Intelligence (XAI) (Published in 2018)

Authors : Amina Adadi, Mohammed Berrada

Abstract : At the dawn of the fourth industrial revolution, we are witnessing a fast and widespread adoption of artificial intelligence (AI) in our daily life, which contributes to accelerating the shift towards a more algorithmic society. However, even with such unprecedented advancements, a key impediment to the use of AI-based systems is that they often lack transparency. Indeed, the black-box nature of these systems allows powerful predictions, but it cannot be directly explained. This issue has triggered a new debate on explainable AI (XAI). A research field holds substantial promise for improving trust and transparency of AI-based systems. It is recognized as the sine qua non for AI to continue making steady progress without disruption. This survey provides an entry point for interested researchers and practitioners to learn key aspects of the young and rapidly growing body of research related to XAI. Through the lens of the literature, we review the existing approaches regarding the topic, discuss trends surrounding its sphere, and present major research trajectories.

5G Evolution: A View on 5G Cellular Technology Beyond 3GPP Release   15 (Published in 2019)

Authors : Amitabha Ghosh, Andreas Maeder, Matthew Baker, Devaki Chandramouli

Abstract : The 5G System is being developed and enhanced to provide unparalleled connectivity to connect everyone and everything, everywhere. The first version of the 5G System, based on the Release 15 (“Rel-15”) version of the specifications developed by 3GPP, comprising the 5G Core (5GC) and 5G New Radio (NR) with 5G User Equipment (UE), is currently being deployed commercially throughout the world both at sub-6 GHz and at mmWave frequencies. Concurrently, the second phase of 5G is being standardized by 3GPP in the Release 16 (“Rel-16”) version of the specifications which will be completed by March 2020. While the main focus of Rel-15 was on enhanced mobile broadband services, the focus of Rel-16 is on new features for URLLC (Ultra-Reliable Low Latency Communication) and Industrial IoT, including Time Sensitive Communication (TSC), enhanced Location Services, and support for Non-Public Networks (NPNs). In addition, some crucial new features, such as NR on unlicensed bands (NR-U), Integrated Access & Backhaul (IAB) and NR Vehicle-to-X (V2X), are also being introduced as part of Rel-16, as well as enhancements for massive MIMO, wireless and wireline convergence, the Service Based Architecture (SBA) and Network Slicing. Finally, the number of use cases, types of connectivity and users, and applications running on top of 5G networks, are all expected to increase dramatically, thus motivating additional security features to counter security threats which are expected to increase in number, scale and variety. In this paper, we discuss the Rel-16 features and provide an outlook towards Rel-17 and beyond, covering both new features and enhancements of existing features. 5G Evolution will focus on three main areas: enhancements to features introduced in Rel-15 and Rel-16, features that are needed for operational enhancements, and new features to further expand the applicability of the 5G System to new markets and use cases.

Wireless Communications Through Reconfigurable Intelligent Surfaces (Published in 2019)

Authors : Ertugrul Basar, Marco Di Renzo, Julien De Rosny, Merouane Debbah, Mohamed-Slim Alouini, Rui Zhang

Abstract : The future of mobile communications looks exciting with the potential new use cases and challenging requirements of future 6th generation (6G) and beyond wireless networks. Since the beginning of the modern era of wireless communications, the propagation medium has been perceived as a randomly behaving entity between the transmitter and the receiver, which degrades the quality of the received signal due to the uncontrollable interactions of the transmitted radio waves with the surrounding objects. The recent advent of reconfigurable intelligent surfaces in wireless communications enables, on the other hand, network operators to control the scattering, reflection, and refraction characteristics of the radio waves, by overcoming the negative effects of natural wireless propagation. Recent results have revealed that reconfigurable intelligent surfaces can effectively control the wavefront, e.g., the phase, amplitude, frequency, and even polarization, of the impinging signals without the need of complex decoding, encoding, and radio frequency processing operations. Motivated by the potential of this emerging technology, the present article is aimed to provide the readers with a detailed overview and historical perspective on state-of-the-art solutions, and to elaborate on the fundamental differences with other technologies, the most important open research issues to tackle, and the reasons why the use of reconfigurable intelligent surfaces necessitates to rethink the communication-theoretic models currently employed in wireless networks. This article also explores theoretical performance limits of reconfigurable intelligent surface-assisted communication systems using mathematical techniques and elaborates on the potential use cases of intelligent surfaces in 6G and beyond wireless networks.

Beyond Herd Immunity Against Strategic Attackers (Published in 2020)

Authors : Vilc Queupe, Leandro Pfleger De Aguiar, Daniel Sadoc Menasche, Cabral Lima, Italo Cunha, Eitan Altman, Rachid El-Azouzi, Francesco De Pellegrini, Alberto Avritzer, Michael Grottke

Abstract : Herd immunity, one of the most fundamental concepts in network epidemics, occurs when a large fraction of the population of devices is immune against a virus or malware. The few individuals who have not taken countermeasures against the threat are assumed to have very low chances of infection, as they are indirectly protected by the rest of the devices in the network. Although very fundamental, herd immunity does not account for strategic attackers scanning the network for vulnerable nodes. In face of such attackers, nodes who linger vulnerable in the network become easy targets, compromising cybersecurity. In this paper, we propose an analytical model which allows us to capture the impact of countermeasures against attackers when both endogenous as well as exogenous infections coexist. Using the proposed model, we show that a diverse set of potential attacks produces non-trivial equilibria, some of which go counter to herd immunity; e.g., our model suggests that nodes should adopt countermeasures even when the remainder of the nodes has already decided to do so.

Unsupervised K-Means Clustering Algorithm (Published in 2020)

Authors : Kristina P. Sinaga, Miin-Shen Yang

Abstract : The k-means algorithm is generally the most known and used clustering method. There are various extensions of k-means to be proposed in the literature. Although it is an unsupervised learning to clustering in pattern recognition and machine learning, the k-means algorithm and its extensions are always influenced by initializations with a necessary number of clusters a priori. That is, the k-means algorithm is not exactly an unsupervised clustering method. In this paper, we construct an unsupervised learning schema for the k-means algorithm so that it is free of initializations without parameter selection and can also simultaneously find an optimal number of clusters. That is, we propose a novel unsupervised k-means (U-k-means) clustering algorithm with automatically finding an optimal number of clusters without giving any initialization and parameter selection. The computational complexity of the proposed U-k-means clustering algorithm is also analyzed. Comparisons between the proposed U-k-means and other existing methods are made. Experimental results and comparisons actually demonstrate these good aspects of the proposed U-k-means clustering algorithm.

Enabling Large Intelligent Surfaces With Compressive Sensing and Deep Learning (Published in 2021)

Authors : Abdelrahman Taha, Muhammad Alrabeiah, Ahmed Alkhateeb

Abstract : Employing large intelligent surfaces (LISs) is a promising solution for improving the coverage and rate of future wireless systems. These surfaces comprise massive numbers of nearly-passive elements that interact with the incident signals, for example by reflecting them, in a smart way that improves the wireless system performance. Prior work focused on the design of the LIS reflection matrices assuming full channel knowledge. Estimating these channels at the LIS, however, is a key challenging problem. With the massive number of LIS elements, channel estimation or reflection beam training will be associated with (i) huge training overhead if all the LIS elements are passive (not connected to a baseband) or with (ii) prohibitive hardware complexity and power consumption if all the elements are connected to the baseband through a fully-digital or hybrid analog/digital architecture. This paper proposes efficient solutions for these problems by leveraging tools from compressive sensing and deep learning. First, a novel LIS architecture based on sparse channel sensors is proposed. In this architecture, all the LIS elements are passive except for a few elements that are active (connected to the baseband). We then develop two solutions that design the LIS reflection matrices with negligible training overhead. In the first approach, we leverage compressive sensing tools to construct the channels at all the LIS elements from the channels seen only at the active elements. In the second approach, we develop a deep-learning based solution where the LIS learns how to interact with the incident signal given the channels at the active elements, which represent the state of the environment and transmitter/receiver locations. We show that the achievable rates of the proposed solutions approach the upper bound, which assumes perfect channel knowledge, with negligible training overhead and with only a few active elements, making them promising for future LIS systems.

DNN-Based Indoor Localization Under Limited Dataset Using GANs and Semi-Supervised Learning (Published in 2022)

Authors : Wafa Njima, Ahmad Bazzi, Marwa Chafii

Abstract : Indoor localization techniques based on supervised learning deliver great performance accuracy while maintaining low online complexity. However, such systems require massive amounts of data for offline training, which necessitates costly measurements. The essence of this paper is twofold with the purpose of providing solutions to missing data of different nature: available unlabeled data and missing unlabeled data. In both cases, we rely on a few labeled available data, which is costly yet insufficient to achieve a high localization accuracy. To address the problem of available unlabeled data, a weighted semi-supervised DNN-based indoor localization approach leveraging pseudo-labeling methods in combination with real labeled samples and inexpensive pseudo-labeled samples is proposed in order to boost localization accuracy, while overcoming the high cost of collecting additional labeled data. As for the extreme case of unavailable unlabeled data, we propose an alternative localization system generating fake fingerprints based on generative adversarial networks (GANs) named ’Weighted GAN based indoor localization’. Furthermore, a deep neural network is trained on a mixed dataset containing both real collected and fake produced data samples using a similar weighting technique in order to improve location prediction performance and avoids overfitting. In terms of localization accuracy, our proposed localization approaches outperform conventional supervised localization schemes utilizing the same collection of real labeled samples. We have tested our proposed methods on both simulated data and experimental data from the publicly available UJIIndoorLoc database, which is built to test indoor positioning systems relying on Wi-Fi fingerprints. Results based on experimental data provide the localization accuracy increase compared to the classical supervised learning method using the same set of labeled collected data when using the weighted semi-supervised and the weighted-GAN approaches by $10.11~\%$ and $8.53~\%$ , respectively.

At a Glance

• Journal: IEEE Access
• Format: Open Access
• Frequency: Continuous
• Submission to Publication: 4-6 weeks (typical)
• Topics: All topics in IEEE
• Average Acceptance Rate: 27%
• Impact Factor: 3.4
• Model: Binary Peer Review
• Article Processing Charge: US $1,995

Featured Articles

Predicting Energy Loss and Permeability of Field-Annealed Amorphous and Nanocrystalline Alloys up to 1 GHz

View in IEEE Xplore

Controlling the Skyrmion Density and Size for Quantized Convolutional Neural Network

Data Integration for Digital Twins in Industrial Automation: A Systematic Literature Review

Submission guidelines.

© 2024 IEEE - All rights reserved. Use of this website signifies your agreement to the IEEE TERMS AND CONDITIONS.

A not-for-profit organization, IEEE is the world’s largest technical professional organization dedicated to advancing technology for the benefit of humanity.

AWARD RULES:

NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE YOUR CHANCES OF WINNING.

These rules apply to the “2024 IEEE Access Best Video Award Part 2″ (the “Award”).

• Sponsor: The Sponsor of the Award is The Institute of Electrical and Electronics Engineers, Incorporated (“IEEE”) on behalf of IEEE Access , 445 Hoes Lane, Piscataway, NJ 08854-4141 USA (“Sponsor”).
• Eligibility: Award is open to residents of the United States of America and other countries, where permitted by local law, who are the age of eighteen (18) and older. Employees of Sponsor, its agents, affiliates and their immediate families are not eligible to enter Award. The Award is subject to all applicable state, local, federal and national laws and regulations. Entrants may be subject to rules imposed by their institution or employer relative to their participation in Awards and should check with their institution or employer for any relevant policies. Void in locations and countries where prohibited by law.
• Agreement to Official Rules : By participating in this Award, entrants agree to abide by the terms and conditions thereof as established by Sponsor. Sponsor reserves the right to alter any of these Official Rules at any time and for any reason.  All decisions made by Sponsor concerning the Award including, but not limited to the cancellation of the Award, shall be final and at its sole discretion. 
• How to Enter: This Award opens on July 1, 2024 at 12:00 AM ET and all entries must be received by 11:59 PM ET on December 31, 2024 (“Promotional Period”).

Entrant must submit a video with an article submission to IEEE Access . The video submission must clearly be relevant to the submitted manuscript.  Only videos that accompany an article that is accepted for publication in IEEE Access will qualify.  The video may be simulations, demonstrations, or interviews with other experts, for example.  Your video file should not exceed 100 MB.

Entrants can enter the Award during Promotional Period through the following method:

• The IEEE Author Portal : Entrants can upload their video entries while submitting their article through the IEEE Author Portal submission site .
• Review and Complete the Terms and Conditions: After submitting your manuscript and video through the IEEE Author Portal, entrants should then review and sign the Terms and Conditions .

Entrants who have already submitted a manuscript to IEEE Access without a video can still submit a video for inclusion in this Award so long as the video is submitted within 7 days of the article submission date.  The video can be submitted via email to the article administrator.  All videos must undergo peer review and be accepted along with the article submission.  Videos may not be submitted after an article has already been accepted for publication. 

The criteria for an article to be accepted for publication in IEEE Access are:

• The article must be original writing that enhances the existing body of knowledge in the given subject area. Original review articles and surveys are acceptable even if new data/concepts are not presented.
• Results reported must not have been submitted or published elsewhere (although expanded versions of conference publications are eligible for submission).
• Experiments, statistics, and other analyses must be performed to a high technical standard and are described in sufficient detail.
• Conclusions must be presented in an appropriate fashion and are supported by the data.
• The article must be written in standard English with correct grammar.
• Appropriate references to related prior published works must be included.
• The article must fall within the scope of IEEE Access
• Must be in compliance with the IEEE PSPB Operations Manual.
• Completion of the required IEEE intellectual property documents for publication.
• At the discretion of the IEEE Access Editor-in-Chief.
• Disqualification: The following items will disqualify a video from being considered a valid submission:
• The video is not original work.
• A video that is not accompanied with an article submission.
• The article and/or video is rejected during the peer review process.
• The article and/or video topic does not fit into the scope of IEEE Access .
• The article and/or do not follow the criteria for publication in IEEE Access .
• Videos posted in a comment on IEEE Xplore .
• Content ​is off-topic, offensive, obscene, indecent, abusive or threatening to others.
• Infringes the copyright, trademark or other right of any third party.
• Uploads viruses or other contaminating or destructive features.
• Is in violation of any applicable laws or regulations.
• Is not in English​.
• Is not provided within the designated submission time.
• Entrant does not agree and sign the Terms and Conditions document.

Entries must be original. Entries that copy other entries, or the intellectual property of anyone other than the Entrant, may be removed by Sponsor and the Entrant may be disqualified. Sponsor reserves the right to remove any entry and disqualify any Entrant if the entry is deemed, in Sponsor’s sole discretion, to be inappropriate.

• Entrant’s Warranty and Authorization to Sponsor: By entering the Award, entrants warrant and represent that the Award Entry has been created and submitted by the Entrant. Entrant certifies that they have the ability to use any image, text, video, or other intellectual property they may upload and that Entrant has obtained all necessary permissions. IEEE shall not indemnify Entrant for any infringement, violation of publicity rights, or other civil or criminal violations. Entrant agrees to hold IEEE harmless for all actions related to the submission of an Entry. Entrants further represent and warrant, if they reside outside of the United States of America, that their participation in this Award and acceptance of a prize will not violate their local laws.
• Intellectual Property Rights: Entrant grants Sponsor an irrevocable, worldwide, royalty free license to use, reproduce, distribute, and display the Entry for any lawful purpose in all media whether now known or hereinafter created. This may include, but is not limited to, the IEEE A ccess website, the IEEE Access YouTube channel, the IEEE Access IEEE TV channel, IEEE Access social media sites (LinkedIn, Facebook, Twitter, IEEE Access Collabratec Community), and the IEEE Access Xplore page. Facebook/Twitter/Microsite usernames will not be used in any promotional and advertising materials without the Entrants’ expressed approval.
• Number of Prizes Available, Prizes, Approximate Retail Value and Odds of winning Prizes: Two (2) promotional prizes of $350 USD Amazon gift cards. One (1) grand prize of a $500 USD Amazon gift card. Prizes will be distributed to the winners after the selection of winners is announced. Odds of winning a prize depend on the number of eligible entries received during the Promotional Period. Only the corresponding author of the submitted manuscript will receive the prize.

The grand prize winner may, at Sponsor’ discretion, have his/her article and video highlighted in media such as the IEEE Access Xplore page and the IEEE Access social media sites.

The prize(s) for the Award are being sponsored by IEEE.  No cash in lieu of prize or substitution of prize permitted, except that Sponsor reserves the right to substitute a prize or prize component of equal or greater value in its sole discretion for any reason at time of award.  Sponsor shall not be responsible for service obligations or warranty (if any) in relation to the prize(s). Prize may not be transferred prior to award. All other expenses associated with use of the prize, including, but not limited to local, state, or federal taxes on the Prize, are the sole responsibility of the winner.  Winner(s) understand that delivery of a prize may be void where prohibited by law and agrees that Sponsor shall have no obligation to substitute an alternate prize when so prohibited. Amazon is not a sponsor or affiliated with this Award.

• Selection of Winners: Promotional prize winners will be selected based on entries received during the Promotional Period. The sponsor will utilize an Editorial Panel to vote on the best video submissions. Editorial Panel members are not eligible to participate in the Award.  Entries will be ranked based on three (3) criteria:
• Presentation of Technical Content
• Quality of Video

Upon selecting a winner, the Sponsor will notify the winner via email. All potential winners will be notified via their email provided to the sponsor. Potential winners will have five (5) business days to respond after receiving initial prize notification or the prize may be forfeited and awarded to an alternate winner. Potential winners may be required to sign an affidavit of eligibility, a liability release, and a publicity release.  If requested, these documents must be completed, signed, and returned within ten (10) business days from the date of issuance or the prize will be forfeited and may be awarded to an alternate winner. If prize or prize notification is returned as undeliverable or in the event of noncompliance with these Official Rules, prize will be forfeited and may be awarded to an alternate winner.

• General Prize Restrictions:  No prize substitutions or transfer of prize permitted, except by the Sponsor. Import/Export taxes, VAT and country taxes on prizes are the sole responsibility of winners. Acceptance of a prize constitutes permission for the Sponsor and its designees to use winner’s name and likeness for advertising, promotional and other purposes in any and all media now and hereafter known without additional compensation unless prohibited by law. Winner acknowledges that neither Sponsor, Award Entities nor their directors, employees, or agents, have made nor are in any manner responsible or liable for any warranty, representation, or guarantee, express or implied, in fact or in law, relative to any prize, including but not limited to its quality, mechanical condition or fitness for a particular purpose. Any and all warranties and/or guarantees on a prize (if any) are subject to the respective manufacturers’ terms therefor, and winners agree to look solely to such manufacturers for any such warranty and/or guarantee.

11.Release, Publicity, and Privacy : By receipt of the Prize and/or, if requested, by signing an affidavit of eligibility and liability/publicity release, the Prize Winner consents to the use of his or her name, likeness, business name and address by Sponsor for advertising and promotional purposes, including but not limited to on Sponsor’s social media pages, without any additional compensation, except where prohibited.  No entries will be returned.  All entries become the property of Sponsor.  The Prize Winner agrees to release and hold harmless Sponsor and its officers, directors, employees, affiliated companies, agents, successors and assigns from and against any claim or cause of action arising out of participation in the Award. 

Sponsor assumes no responsibility for computer system, hardware, software or program malfunctions or other errors, failures, delayed computer transactions or network connections that are human or technical in nature, or for damaged, lost, late, illegible or misdirected entries; technical, hardware, software, electronic or telephone failures of any kind; lost or unavailable network connections; fraudulent, incomplete, garbled or delayed computer transmissions whether caused by Sponsor, the users, or by any of the equipment or programming associated with or utilized in this Award; or by any technical or human error that may occur in the processing of submissions or downloading, that may limit, delay or prevent an entrant’s ability to participate in the Award.

Sponsor reserves the right, in its sole discretion, to cancel or suspend this Award and award a prize from entries received up to the time of termination or suspension should virus, bugs or other causes beyond Sponsor’s control, unauthorized human intervention, malfunction, computer problems, phone line or network hardware or software malfunction, which, in the sole opinion of Sponsor, corrupt, compromise or materially affect the administration, fairness, security or proper play of the Award or proper submission of entries.  Sponsor is not liable for any loss, injury or damage caused, whether directly or indirectly, in whole or in part, from downloading data or otherwise participating in this Award.

Representations and Warranties Regarding Entries: By submitting an Entry, you represent and warrant that your Entry does not and shall not comprise, contain, or describe, as determined in Sponsor’s sole discretion: (A) false statements or any misrepresentations of your affiliation with a person or entity; (B) personally identifying information about you or any other person; (C) statements or other content that is false, deceptive, misleading, scandalous, indecent, obscene, unlawful, defamatory, libelous, fraudulent, tortious, threatening, harassing, hateful, degrading, intimidating, or racially or ethnically offensive; (D) conduct that could be considered a criminal offense, could give rise to criminal or civil liability, or could violate any law; (E) any advertising, promotion or other solicitation, or any third party brand name or trademark; or (F) any virus, worm, Trojan horse, or other harmful code or component. By submitting an Entry, you represent and warrant that you own the full rights to the Entry and have obtained any and all necessary consents, permissions, approvals and licenses to submit the Entry and comply with all of these Official Rules, and that the submitted Entry is your sole original work, has not been previously published, released or distributed, and does not infringe any third-party rights or violate any laws or regulations.

12.Disputes:  EACH ENTRANT AGREES THAT: (1) ANY AND ALL DISPUTES, CLAIMS, AND CAUSES OF ACTION ARISING OUT OF OR IN CONNECTION WITH THIS AWARD, OR ANY PRIZES AWARDED, SHALL BE RESOLVED INDIVIDUALLY, WITHOUT RESORTING TO ANY FORM OF CLASS ACTION, PURSUANT TO ARBITRATION CONDUCTED UNDER THE COMMERCIAL ARBITRATION RULES OF THE AMERICAN ARBITRATION ASSOCIATION THEN IN EFFECT, (2) ANY AND ALL CLAIMS, JUDGMENTS AND AWARDS SHALL BE LIMITED TO ACTUAL OUT-OF-POCKET COSTS INCURRED, INCLUDING COSTS ASSOCIATED WITH ENTERING THIS AWARD, BUT IN NO EVENT ATTORNEYS’ FEES; AND (3) UNDER NO CIRCUMSTANCES WILL ANY ENTRANT BE PERMITTED TO OBTAIN AWARDS FOR, AND ENTRANT HEREBY WAIVES ALL RIGHTS TO CLAIM, PUNITIVE, INCIDENTAL, AND CONSEQUENTIAL DAMAGES, AND ANY OTHER DAMAGES, OTHER THAN FOR ACTUAL OUT-OF-POCKET EXPENSES, AND ANY AND ALL RIGHTS TO HAVE DAMAGES MULTIPLIED OR OTHERWISE INCREASED. ALL ISSUES AND QUESTIONS CONCERNING THE CONSTRUCTION, VALIDITY, INTERPRETATION AND ENFORCEABILITY OF THESE OFFICIAL RULES, OR THE RIGHTS AND OBLIGATIONS OF ENTRANT AND SPONSOR IN CONNECTION WITH THE AWARD, SHALL BE GOVERNED BY, AND CONSTRUED IN ACCORDANCE WITH, THE LAWS OF THE STATE OF NEW JERSEY, WITHOUT GIVING EFFECT TO ANY CHOICE OF LAW OR CONFLICT OF LAW, RULES OR PROVISIONS (WHETHER OF THE STATE OF NEW JERSEY OR ANY OTHER JURISDICTION) THAT WOULD CAUSE THE APPLICATION OF THE LAWS OF ANY JURISDICTION OTHER THAN THE STATE OF NEW JERSEY. SPONSOR IS NOT RESPONSIBLE FOR ANY TYPOGRAPHICAL OR OTHER ERROR IN THE PRINTING OF THE OFFER OR ADMINISTRATION OF THE AWARD OR IN THE ANNOUNCEMENT OF THE PRIZES.

• Limitation of Liability:  The Sponsor, Award Entities and their respective parents, affiliates, divisions, licensees, subsidiaries, and advertising and promotion agencies, and each of the foregoing entities’ respective employees, officers, directors, shareholders and agents (the “Released Parties”) are not responsible for incorrect or inaccurate transfer of entry information, human error, technical malfunction, lost/delayed data transmissions, omission, interruption, deletion, defect, line failures of any telephone network, computer equipment, software or any combination thereof, inability to access web sites, damage to a user’s computer system (hardware and/or software) due to participation in this Award or any other problem or error that may occur. By entering, participants agree to release and hold harmless the Released Parties from and against any and all claims, actions and/or liability for injuries, loss or damage of any kind arising from or in connection with participation in and/or liability for injuries, loss or damage of any kind, to person or property, arising from or in connection with participation in and/or entry into this Award, participation is any Award-related activity or use of any prize won. Entry materials that have been tampered with or altered are void. If for any reason this Award is not capable of running as planned, or if this Award or any website associated therewith (or any portion thereof) becomes corrupted or does not allow the proper playing of this Award and processing of entries per these rules, or if infection by computer virus, bugs, tampering, unauthorized intervention, affect the administration, security, fairness, integrity, or proper conduct of this Award, Sponsor reserves the right, at its sole discretion, to disqualify any individual implicated in such action, and/or to cancel, terminate, modify or suspend this Award or any portion thereof, or to amend these rules without notice. In the event of a dispute as to who submitted an online entry, the entry will be deemed submitted by the authorized account holder the email address submitted at the time of entry. “Authorized Account Holder” is defined as the person assigned to an email address by an Internet access provider, online service provider or other organization responsible for assigning email addresses for the domain associated with the email address in question. Any attempt by an entrant or any other individual to deliberately damage any web site or undermine the legitimate operation of the Award is a violation of criminal and civil laws and should such an attempt be made, the Sponsor reserves the right to seek damages and other remedies from any such person to the fullest extent permitted by law. This Award is governed by the laws of the State of New Jersey and all entrants hereby submit to the exclusive jurisdiction of federal or state courts located in the State of New Jersey for the resolution of all claims and disputes. Facebook, LinkedIn, Twitter, G+, YouTube, IEEE Xplore , and IEEE TV are not sponsors nor affiliated with this Award.
• Award Results and Official Rules: To obtain the identity of the prize winner and/or a copy of these Official Rules, send a self-addressed stamped envelope to Kimberly Rybczynski, IEEE, 445 Hoes Lane, Piscataway, NJ 08854-4141 USA.

open access papers

Showing 1 - 12 of 41 resources. too many results use the search filters to refine your search..

• Sort by: Relevance
• Title (A-Z)
• Title (Z-A)

• SSCS Members: Free IEEE Members: Free Non-members: Free

Fully Open Access Topical Journals

A Growing Collection of Gold Fully Open Access (OA) Options

IEEE offers more options than ever to authors with the launch of new gold fully open access journals spanning a wide range of technologies. These journals are significant additions to IEEE’s well-known and respected portfolio of fully open access journals. In addition, many of the journals featured here target an accelerated publication time frame of 10 weeks for most accepted papers to help get your research exposed faster. Visit the publication home page of each title for details.

The fully open access journals are accepting submissions. Please see each journal’s description below for more details. IEEE titles are compliant with funder mandates. All IEEE Open Access titles, current and new, will be hosted on the IEEE Xplore ® platform.

Call for Papers

Submit a paper to an ieee fully open access journal.

IEEE Open Journal of Antennas and Propagation

High-quality, peer reviewed research covering antennas, including analysis, design, development, measurement, standards, and testing; radiation, propagation, and the interaction of electromagnetic waves with discrete and continuous media.

This fully open access journal publishes high-quality, peer reviewed papers covering antennas, including analysis, design, development, measurement, standards, and testing; radiation, propagation, and the interaction of electromagnetic waves with discrete and continuous media; and applications and systems pertinent to antennas, propagation, and sensing, such as applied optics, millimeter-and sub-millimeter-wave techniques, antenna signal processing and control, radio astronomy, and propagation and radiation aspects of terrestrial and space-based communication, including wireless, mobile, satellite, and telecommunications at all frequencies. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Konstantina (Nantia) Nikita Professor National Technical University of Athens, Greece

Learn More and Submit a Paper

IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Addresses the growing field of applications in Earth observations and remote sensing and provides a venue for the rapidly expanding special issues that are being sponsored by the IEEE Geosciences and Remote Sensing Society.

The IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing addresses the growing field of applications in Earth observations and remote sensing, and also provides a venue for the rapidly expanding special issues that are being sponsored by the IEEE Geosciences and Remote Sensing Society. The journal draws upon the experience of the highly successful “IEEE Transactions on Geoscience and Remote Sensing” and provide a complementary medium for the wide range of topics in applied earth observations. Papers should address current issues and techniques in applied remote and in situ sensing, their integration, and applied modeling and information creation for understanding the Earth. Applications are for the Earth, oceans and atmosphere. Topics can include observations, derived information such as forecast data, simulated information, data assimilation and Earth information techniques to address science and engineering issues of the Earth system. The technical content of papers must be both new and significant.

IEEE Open Journal of Circuits and Systems

Featuring high-quality peer reviewed research covering the theory, analysis, design, tools, and implementation of circuits and systems.

This fully open access journal publishes high-quality, peer-reviewed papers covering the theory, analysis, design, tools, and implementation of circuits and systems. This includes their theoretical foundations, applications, and architectures, as well as circuits and systems implementation of algorithms for signal and information processing. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Gabriele Manganaro, Ph.D., FIEEE Technology Director Analog Devices, Inc., USA

IEEE Open Journal of the Communications Society

Featuring high-quality peer reviewed research covering science, technology, applications and standards for information organization, collection and transfer using electronic, optical and wireless channels and networks.

As a fully open access journal publishing high-quality peer reviewed papers,  IEEE Open Journal of the Communications Society  covers science, technology, applications and standards for information organization, collection and transfer using electronic, optical and wireless channels and networks, including but not limited to: Systems and network architecture, control and management; Protocols, software and middleware; Quality of service, reliability and security; Modulation, detection, coding, and signaling; Switching and routing; Mobile and portable communications; Terminals and other end-user devices; Networks for content distribution and distributed computing; and Communications-based distributed resources control. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Octavia A. Dobre, Dipl.-Ing., Ph.D. Professor and Research Chair Memorial University, Canada

IEEE Open Journal of the Computer Society

Forum for rapid publication of open access articles describing high-impact results in all aspects of theory, design, practice, and application relating to computer and information processing science and technology.

The IEEE Open Journal of the Computer Society (OJ-CS) is a rigorously peer-reviewed forum for rapid publication of open access articles describing high-impact results in all areas of interest to the IEEE Computer Society. This new fully open access journal complements existing IEEE Computer Society publications by providing a rapid review cycle and a thorough review of technical articles. It is dedicated to publishing articles on the latest emerging topics and trends in all aspects of computing with a scope that encompasses all aspects of theory, design, practice, and application relating to computer and information processing science and technology. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Dr. Song Guo Department of Computing The Hong Kong Polytechnic University

IEEE Open Journal of Control Systems

Publication of the IEEE Control Systems Society, this journal aims to publish high-quality papers on the theory, design, optimization, and applications of dynamic systems and control.

The IEEE Open Journal of Control Systems covers the theory, design, optimization, and applications of dynamic systems and control. The field integrates elements of sensing, communication, decision and actuation components, as relevant for the analysis, design and operation of dynamic systems and control. The systems considered include: technological, physical, biological, economic, organizational and other entities, and combinations thereof. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Sonia Martínez University of California, San Diego United States

IEEE Data Descriptions

Now Accepting Submissions! This new publication is a peer-reviewed journal that publishes short articles on all aspects of data: data descriptors, data collections, and metadata.

IEEE Data Descriptions is a peer-reviewed journal that publishes short articles on all aspects of data: data descriptors, data collections, and metadata. Its overarching purpose is to promote publicly available datasets (open access or subscription-based access) in support of reproducible science while at the same time bringing insights into the associated dataset, data collection methods, and data quality. The metadata collected provides enhanced dataset discoverability and creates a foundation for future data science tools such as auto-discovery and mashups.

Datasets described in IEEE Data Descriptions must be findable, accessible, interoperable, and reusable. The dataset needs to be of a quality high enough that other researchers can use it for their research experimentation and have some permanence. Articles describing datasets must be comprehensive and follow the outlined sections listed in Author Information. The preference is for data to be stored within IEEE DataPort, however, IEEE Data Descriptions accepts submissions where data is stored at other persistent/permanent locations.

Editor-in-Chief: Stephen Makonin Simon Fraser University Vancouver, Canada

IEEE Journal of the Electron Devices Society

Featuring high quality research in the field of electron and ion devices ranging from fundamentals to applied research.

Featuring high-quality research in the field of electron and ion devices ranging from fundamentals to applied research, this journal provides authors an affordable outlet for rapid publishing and universal access, coupled with superior technical quality.

IEEE Open Journal of Engineering in Medicine and Biology

High-quality research covering the development and application of engineering concepts and methods to biology, medicine and health sciences.

As a fully open access journal publishing high-quality peer reviewed papers, IEEE Open Journal of Engineering in Medicine and Biology covers the development and application of engineering concepts and methods to biology, medicine and health sciences to provide effective solutions to biological, medical and healthcare problems. It encompasses the development of mathematical theories, physical, biological and chemical principles, computational models and algorithms, devices and systems for clinical, industrial and educational applications. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Paolo Bonato Associate Professor Harvard University, USA

IEEE Journal on Exploratory Solid-State Computational Devices and Circuits

Multi-disciplinary research in solid-state circuits using exploratory materials and devices for novel energy efficient computation beyond standard CMOS (Complementary Metal Oxide Semiconductor) technology.

Multi-disciplinary research in solid-state circuits using exploratory materials and devices for novel energy efficient computation beyond standard CMOS (Complementary Metal Oxide Semiconductor) technology. Focus is on the exploration of materials, devices and computation circuits to enable Moore’s Law to continue for computation beyond a 10 to 15 year horizon (beyond end of the roadmap for CMOS technologies) with the associated density scaling and improvement in energy efficiency.

IEEE Open Journal on Immersive Displays

Now Accepting Submissions! New publication will be home to publications in display science and applications.

The IEEE Open Journal on Immersive Displays (OJID) will be home to publications in display science and applications. The field of displays is diverse, ranging from the science and engineering of materials and devices to their application in high definition, form-factor-independent displays featuring interactivity, virtual and augmented reality, and 3D content. Submissions on advanced fabrication processing, thin film active and passive devices, and lifetime and reliability evaluation are welcome when display is the focus or where there is a direct relationship to the nature of the display system. Tutorial and review papers extending the frontiers of immersive display technologies and novel applications are also published.

Editor-in-Chief: Arokia Nathan University of Cambridge Hertfordshire, U.K.

IEEE Journal of Indoor and Seamless Positioning and Navigation

Publishes original research in the fields of localization and tracking of people, robots, and objects.

IEEE Journal of Indoor and Seamless Positioning and Navigation (J-ISPIN) publishes original research in the fields of localization and tracking of people, robots, and objects. It covers all aspects of localization systems, including sensing, communications, location-based services, mapping, protocols, human interfaces and standards. The scope includes methods and systems addressing indoor environments as well as those enabling seamless transition between heterogeneous indoor contexts or between indoor and outdoor environments, for example where Global Navigation Satellites Systems are underperforming or unavailable.

Editor-in-Chief: Valérie Renaudin Senior Researcher University Gustave Eiffel, France

IEEE Open Journal of the Industrial Electronics Society

Featuring high quality research covering the theory and applications of electronics, controls, communications, instrumentation and computational intelligence to industrial and manufacturing systems and processes.

This fully open access journal publishes high-quality, peer-reviewed papers covering the theory and applications of electronics, controls, communications, instrumentation and computational intelligence to industrial and manufacturing systems and processes. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Dr. Leopoldo Garcia Franquelo Professor, Electronics Engineering Universidad de Sevilla, Spain

IEEE Open Journal of Industry Applications

Covering the advancement of the theory and practice of electrical and electronic engineering in the development, design, manufacture and application of electrical systems, apparatus, devices, and controls to the processes and equipment of industry and commerce.

As a fully open access journal publishing high-quality peer reviewed papers, IEEE Open Journal of Industry Applications covers the advancement of the theory and practice of electrical and electronic engineering in the development, design, manufacture and application of electrical systems, apparatus, devices, and controls to the processes and equipment of industry and commerce; the promotion of safe, reliable, and economic installations; industry leadership in energy conservation and environmental, health, and safety issues; the creation of voluntary engineering standards and recommended practices; and the professional development of its readers. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Professor Pericle Zanchetta Fellow IEEE Faculty of Engineering University of Nottingham, UK

IEEE Open Journal of Instrumentation and Measurement

Publication of the Instrumentation and Measurement Society, this journal publishes papers on the science, technology, and application of instrumentation and measurement.

The IEEE Open Journal of Instrumentation and Measurement publishes papers on the science, technology, and application of instrumentation and measurement. Instrumentation and measurement, in the current context of the IEEE IMS community, consists of methods, instruments, systems, and applications for measurement, detection, tracking, monitoring, characterization, identification, sensing, estimation, recognition, or diagnosis of a physical phenomenon; or metrology and measurement theory including measurement uncertainty, instrument precision, calibration, etc.

Editor-in-Chief: Shervin Shirmohammadi University of Ottawa Canada

IEEE Open Journal of Intelligent Transportation Systems

Featuring high-quality research covering the theoretical, experimental and operational aspects of electrical and electronics engineering and information technologies as applied to Intelligent Transportation Systems (ITS).

As a fully open access journal publishing high-quality peer reviewed papers, IEEE Open Journal of Intelligent Transportation Systems covers theoretical, experimental and operational aspects of electrical and electronics engineering and information technologies as applied to Intelligent Transportation Systems (ITS), defined as those systems utilizing synergistic technologies and systems engineering concepts to develop and improve transportation systems of all kinds. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Dr. Bart van Arem Full Professor of Transport Modelling Delft University of Technology, The Netherlands

IEEE Transactions on Machine Learning in Communications and Networking

Featuring high-quality manuscripts on advances in machine learning methods for and applications to communications and networking.

The IEEE Transactions on Machine Learning in Communications and Networking publishes high-quality manuscripts on advances in machine learning methods for and applications to communications and networking. Furthermore, articles developing novel communication and networking techniques for distributed machine learning algorithms are of interest. Both theoretical contributions (including new theories, techniques, concepts, algorithms, and analyses) and practical contributions (including system experiments, prototypes, and new applications) are encouraged.

Editor-in-Chief: Walid Saad Professor Virginia Tech Research Center – Arlington, USA

IEEE Journal of Microwaves

Covering articles on the theory, techniques and applications of guided wave and wireless technologies and spanning the electromagnetic spectrum from RF/microwave through millimeter-waves and terahertz.

The IEEE Journal of Microwaves is a fully open access publication covering the complete scope of the Microwave Theory and Techniques Society which includes articles on the theory, techniques and applications of guided wave and wireless technologies and spanning the electromagnetic spectrum from RF/microwave through millimeter-waves and terahertz, covering the aspects of materials, components, devices, circuits, modules, and systems which involve the generation, modulation, demodulation, control, transmission, sensing and effects of electromagnetic signals.

Editor-in-Chief: Peter H. Siege THz Global, NASA Jet Propulsion Laboratory, California Institute of Technology Pasadena, California

IEEE Open Journal of Nanotechnology

Featuring high-quality, peer reviewed research covering the theory, design, and development of nanotechnology and its scientific, engineering, and industrial applications.

As a fully open access journal publishing high-quality peer reviewed papers, IEEE Open Journal of Nanotechnology covers the theory, design, and development of nanotechnology and its scientific, engineering, and industrial applications. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Co-Editors-in-Chief: Professor Wen J. Li Chair Professor of Biomedical Engineering Associate Provost City University of Hong Kong, Hong Kong

Professor Jin-Woo Kim Professor of Biological Engineering and Nanoscience & Engineering University of Arkansas, USA

Professor Seiji Samukawa Director of Innovative Energy Research Center, Institute of Fluid Science (IFS) Principal Investigator of Advance Institute for Materials Research (AIMR) Tohoku University, Japan

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Covering the rehabilitative and neural aspects of biomedical engineering, including functional electrical stimulation, acoustic dynamics, human performance measurement, and more.

Rehabilitative and neural aspects of biomedical engineering, including functional electrical stimulation, acoustic dynamics, human performance measurement and analysis, nerve stimulation, electromyography, motor control and stimulation; and hardware and software applications for rehabilitation engineering and assistive devices.

IEEE Photonics Journal

Dedicated to the rapid disclosure of research at the forefront of all areas of photonics and addressing issues ranging from fundamental understanding to emerging technologies.

Breakthroughs in the generation of light and its control and utilization have given rise to the field of Photonics: a rapidly expanding area of science and technology with major technological and economic impact. IEEE Photonics Journal is an online-only journal dedicated to the rapid disclosure of top-quality peer-reviewed research at the forefront of all areas of photonics. Contributions addressing issues ranging from fundamental understanding to emerging technologies and applications are within the scope of the Journal.

IEEE Open Access Journal of Power and Energy

High-quality, peer reviewed research covering the development, planning, design, construction, maintenance, installation, and operation of equipment, structures, power systems and usage of electric energy, including its measurement and control.

As a fully open access journal publishing high-quality peer reviewed papers, the IEEE Open Access Journal of Power and Energy publishes articles focused on the development, planning, design, construction, maintenance, installation, and operation of equipment, structures, and power systems for the safe, sustainable, economic, and reliable conversion, generation, transmission, distribution, storage, and usage of electric energy, including its measurement and control. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Fangxing “Fran” Li The University of Tennessee Knoxville, TN 37996 USA [email protected]

IEEE Open Journal of Power Electronics

Covering the development and application of power electronic systems and technologies, which encompass the effective use of electronic components, the application of circuit theory and design techniques and the development of analytical methods and tools.

The IEEE Open Journal of Power Electronics covers the development and application of power electronic systems and technologies, which encompass the effective use of electronic components, the application of circuit theory and design techniques and the development of analytical methods and tools toward efficient electronic conversion, control and conditioning of electric power to enable the sustainable use of energy. As a fully open access journal publishing high-quality peer reviewed papers, the Society’s aim is to publish novel developments as well as tutorial and survey articles including those of value to both the R&D and practicing professionals in the field. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Alan Mantooth, Ph.D., P.E., FIEEE Distinguished Professor of Electrical Engineering University of Arkansas, USA

IEEE Transactions on Privacy

Now Accepting Submissions! New publication will provide a multidisciplinary forum for theoretical, methodological, engineering, and applications aspects of privacy and data protection, including specification, design, implementation, testing, and validation.

The IEEE Transactions on Privacy provides a multidisciplinary forum for theoretical, methodological, engineering, and applications aspects of privacy and data protection, including specification, design, implementation, testing, and validation. Privacy, in this context, is defined as the freedom from unauthorized intrusion in its broadest sense, arising from any activity in information collection, information processing, information dissemination or invasion. The transactions publishes articles reporting significant advances in theoretical models and formalization as well as engineering tools supporting the above activities, design frameworks and languages, architectures, infrastructures, model-based approaches, study cases, and standards.

IEEE Transactions on Quantum Engineering

Publishing regular, review, and tutorial articles based on the engineering applications of quantum phenomena, including quantum computation, information, communication, software, hardware, devices, and metrology.

Publishes regular, review, and tutorial articles based on the engineering applications of quantum phenomena, including quantum computation, information, communication, software, hardware, devices, and metrology. Articles also address quantum-engineering aspects of superconductivity, magnetics, microwave techniques, photonics, and signal processing.

IEEE Journal of Selected Areas in Sensors

Now Accepting Submissions! New publication of the IEEE Sensors Council, this journal publishes papers in all areas of the field of interest of the IEEE Sensors Council.

The IEEE Journal of Selected Areas in Sensors publishes papers in all areas of the field of interest of the IEEE Sensors Council, i.e., the theory, design, simulation, fabrication, manufacturing and application of devices for sensing and transducing physical, chemical, and biological phenomena, with emphasis on the electronics, physics and reliability aspects of sensors and integrated sensor-actuators. The Journal is built exclusively from papers on selected topics of current interest to the Sensors community.

Editor-in-Chief: Chonggang Wang InterDigital, Inc. USA

IEEE Sensors Reviews

Now Accepting Submissions! This new publication publishes papers in all areas of the field of interest of the IEEE Sensors Council, i.e., the theory, design, simulation, fabrication, manufacturing and application of devices for sensing and transducing physical, chemical, and biological phenomena.

IEEE Sensors Reviews , a new 100% open access technical journal, publishes papers in all areas of the field of interest of the IEEE Sensors Council, i.e., the theory, design, simulation, fabrication, manufacturing and application of devices for sensing and transducing physical, chemical, and biological phenomena, with emphasis on the electronics, physics and reliability aspects of sensors and integrated sensor-actuators. The Journal is built exclusively from papers on selected topics of current interest to the Sensors community.

Editor-in-Chief: Carlos Marques Editor-in-Chief University of Aveiro, Portugal

IEEE Open Journal of Signal Processing

High-quality, peer reviewed research covering the enabling technology for the generation, transformation, extraction, and interpretation of information.

This fully open access journal publishes high-quality, peer-reviewed papers covering the enabling technology for the generation, transformation, extraction, and interpretation of information. It comprises the theory, algorithms with associated architectures and implementations, and applications related to processing information contained in many different formats broadly designated as signals. Signal processing uses mathematical, statistical, computational, heuristic, and/or linguistic representations, formalisms, modeling techniques and algorithms for generating, transforming, transmitting, and learning from signals. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Brendt Wohlberg Los Alamos National Laboratory, USA

IEEE Open Journal of the Solid-State Circuits Society

High-quality, peer reviewed research covering the design, implementation, and application of solid-state integrated circuits.

As a fully open access journal publishing high-quality peer reviewed papers, IEEE Open Journal of the Solid-State Circuits Society covers design, implementation and application of solid-state integrated circuits. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Jan Craninckx Distinguished Member of Technical Staff IMEC, Belgium

IEEE Open Journal of Systems Engineering

Provides a forum for practitioners, scientists, academics, and researchers engaged in the discipline of Systems Engineering.

The IEEE Open Journal of Systems Engineering (OJSE) is an open access journal that is sponsored by the consortium of IEEE Aerospace and Electronic Systems Society, IEEE Systems, Man, and Cybernetics Society, and the IEEE Systems Council. OJSE provides a forum for practitioners, scientists, academics, and researchers engaged in the discipline of Systems Engineering. Multidisciplinary aspects of systems engineering is a focus of this journal. Methodologies, tools, principles, and applied engineering aspects of the process of systems engineering for complex systems are of interest. The methodologies, tools, and principles include such elements as model-based systems engineering; digital thread; requirements generation, flowdown, tracking, needs analysis, validation/verification; integration and test; and full life cycle of the target system. OJSE deals primarily with the science, methodology, and tools of systems engineering, rather than the results of the application of systems engineering that is the focus of other IEEE journals.

Editor-in-Chief: W. Dale Blair Principal Research Engineer Georgia Tech Research Institute, USA

IEEE Systems, Man, and Cybernetics Letters

Now Accepting Submissions! New publication of the IEEE Systems, Man, and Cybernetics Society (SMC), this journal covers the ultimate aims and key strategies of the SMC society towards the next generation of symbiotic human and machine intelligence systems.

IEEE Systems, Man, and Cybernetics Letter (SMC-L) will cover the ultimate aims and key strategies of the SMC society towards the next generation of symbiotic human and machine intelligence systems. The feature of SMC-L is highlighted by its rapid publication of peer-reviewed short articles within 5 pages, which provide a timely and concise account of innovative research ideas, novel application results, and significant theoretical findings, as well as analyses of emerging trends and groundbreakingly work in SMC fields. SMC-L will provide a new means for members and readers to complement established SMC transactions.

Editor-in-Chief: Prof. Yingxu Wang Editor-In-Chief Univ. of Calgary, Canada

IEEE Journal of Translational Engineering in Health and Medicine

Bridges the engineering and clinical worlds, focusing on detailed descriptions of advanced technical solutions to a clinical need along with clinical results and healthcare relevance.

This journal bridges the engineering and clinical worlds, focusing on detailed descriptions of advanced technical solutions to a clinical need along with clinical results and healthcare relevance. Its aim is to provide a platform for state-of-the-art technology directions in the interdisciplinary field of biomedical engineering, embracing engineering, life sciences and medicine. The journal provides an active forum for clinical research and relevant state-of-the-art technology for members of all the IEEE societies that have an interest in biomedical engineering as well as reaching out directly to physicians and the medical community through the American Medical Association (AMA) and other clinical societies.

IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control

Covering high-quality, peer reviewed research theory, technology, materials, and applications relating to the generation, transmission, and detection of ultrasonic waves and related phenomena.

OJ-UFFC covers theory, technology, materials, and applications relating to: the generation, transmission, and detection of ultrasonic waves and related phenomena; medical ultrasound, and associated technologies; ferroelectric, piezoelectric, and piezomagnetic materials; frequency generation and control, timing, and time coordination and distribution. This interest ranges from fundamental studies to the design and/or applications of devices, sensors, systems and manufacturing technologies within the general scope defined above. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Steven Freear University of Leeds, School of Electronic and Electrical Engineering Leeds, United Kingdom

IEEE Open Journal of Vehicular Technology

Featuring high-quality, peer reviewed research on the theoretical, experimental and operational aspects of electrical and electronics engineering in mobile radio, motor vehicles and land transportation.

This fully open access journal publishes high-quality, peer-reviewed papers covering the theoretical, experimental and operational aspects of electrical and electronics engineering in mobile radio, motor vehicles and land transportation. (a) Mobile radio shall include all terrestrial mobile services. (b) Motor vehicles shall include the components and systems and motive power for propulsion and auxiliary functions. (c) Land transportation shall include the components and systems used in both automated and non-automated facets of ground transport technology. The journal peer-review process targets a publication period of 10 weeks from submission to online publication.

Editor-in-Chief: Dr. Sumei Sun Fellow of the IEEE Principal Scientist, Institute for Infocomm Research Adjunct Professor, National University of Singapore, Singapore

Sign up for IEEE open access news

Sign Up Now

Institutions

Learn about open access options

Answers to common questions on open access

Society Members

APC discounts now available

IEEE Seminar Topics: Download PDF Reports | Journals